STANCHION ANCHORS

Like silent sentries that are on duty 24 hours a day, our anchor products are ready to satisfy a multitude of your fall protection requirements. Made of the highest quality U.S. certified carbon steel, anchors are manufactured by certified welders and are designed and tested to withstand a minimum 5,000 lb load. Roof anchors can be used for securing lifelines and the tieback of suspension equipment or direct rigging of a bosun’s chair for window cleaners. Our expansive anchor product line meet or exceed OSHA and ANSI safety standards and are compatible with new construction as well as retro-fit projects.

RETROFIT CONSTRUCTION

NEW CONSTRUCTION

Axis anchors tie off point

NEW CONSTRUCTION

CAST-IN-PLACE ANCHOR

The cast-in-place anchor is used on concrete roofs. The embed and anchor is placed during forming before the concrete is poured.

WELDABLE ROOF ANCHOR

Used on new steel frame construction. The anchor is field welded to the structural beams. Web stiffeners and bracing can be applied for added strength.

RETROFIT CONSTRUCTION PROJECTS

BEAM WRAP ANCHOR

The Beam Wrap Anchor offers a solution when an adequate sized steel beam is available for attachment.

BOLT THROUGH ANCHOR

The Bolt-Through Anchor is used on wall, roof or floor slabs which are made up of structural concrete. The anchor is attached through the deck with a bolt, back plate, lock washer and nut.

EPOXY ANCHOR

Used on wall, roof or floor slabs where the thickness and strength of the concrete is adequate, the Epoxy Anchor is attached with stainless steel rods and certified adhesive systems.

REINFORCEMENT FRAMING

The reinforcement framing kit is used to attach anchors to open web joist framing members. This package is designed to provide safe tie back solutions on roofs with little to no structural support